1 Which two characteristics are determined by the chip set on a motherboard? (Choose two.)
*maximum amount of memory that can be installed
operating system compatibility
*type of connectors that will be on the motherboard
keyboard layout
2 Which two activities are normally controlled by the Northbridge part of the chip set? (Choose two.)
communication between the CPU and the I/O ports
*access to the RAM
communication between the CPU and the hard drive
*access to the video card
communication between the CPU and the sound card
3 Which CPU architecture uses a small set of instructions that are designed to be executed rapidly?
CISC
RAID
*RISC
RISK
SCSI
4 Which type of memory is unable to have the contents modified?
DRAM
RAM
*ROM
SRAM
5 Which type of memory is primarily used as cache memory?
DRAM
RAM
ROM
*SRAM
6 Which three devices are considered output devices? (Choose three.)
fingerprint scanner
*headphones
keyboard
*monitor
mouse
*printer
7 Which type of ROM can be reprogrammed with software while it is still physically installed in the computer?
*EEPROM
EPROM
PROM
ROM
8 Refer to the exhibit. Which type of cable is shown in the graphic?
FireWire
Parallel
*Serial
USB
9 Which important feature is offered by the USB standard?
A single USB connection to a computer can support up to 255 separate devices.
It offers rates of around 580 Mb/sec in low-speed mode.
It allows up to 920 Mb/sec in the 2.0 version.
*It can supply power from the computer to devices.
10 What are the two connector types for the 1394a interface? (Choose two.)
2-pin
*4-pin
*6-pin
8-pin
9-pin
15-pin
11 Which type of computer resources are direct lines to the processor used by computer components to request information from the CPU?
DMAs
I/O addresses
*IRQs
memory addresses
12 Which two devices are considered input devices? (Choose two.)
*biometric authentication device
printer
*digital camera
projector
speakers
13 A technician needs to back up 4 GB of data using a single storage medium. Which medium can hold the entire 4 GB on a single disc?
floppy disc
CD-RW
CD-R
*DVD+/-R
14 A technician is helping a customer compare two hard drives. Which unit of measurement is used for the hard drive speed?
*revolutions per minute
gigabytes
pages per minute
clusters per minute
15 Which two form factors are commonly used to build a new computer? (Choose two.)
*BTX
NLQ
*ATX
CLV
ECC
16 Which two characteristics of a motherboard can be determined by the form factor? (Choose two.)
type of processor supported
color
*size
maximum memory supported
*shape
17 PATA data cables are available in two different types. The types are distinguished by the number of conductors. Which two types are available? (Choose two.)
6
*40
68
*80
120
18 How many conductors are found in a SATA data cable?
3
4
*7
10
12
19 Which three system resources are commonly used for communication between the CPU or memory and other components in the computer? (Choose three.)
*IRQ
*DMA
UDP
*I/O address
USB
PnP
20 Which two categories are used to classify CPU architecture? (Choose two.)
ATX
BTX
*CISC
PnP
*RISC
ZIF
21 Which technology would be best to use for drive redundancy and data protection?
CD
DVD
PATA
*RAID
SCSI
22 Refer to the exhibit. Based on the advertisement that is shown, what is the native resolution of this computer system?
8x
3 GB
2.0 GHz
1919 MB
*1280 x 800
13.35 x 9.57
23 Which type of RAM chip has the fastest clock rate but consumes the least power and generates the least heat?
RDRAM
DDR SDRAM
DDR2 SDRAM
*DDR3 SDRAM
24 What is the function of a capture card?
provides a connection to multiple storage devices
enables 32-bit or 64-bit redundant connections to the computer
*enables a video signal to be recorded to the computer hard drive
connects to a TV source and enables the TV signals to be watched but not recorded on a computer
25 Which expansion slot would be used to install a video capture card in a new computer?
Advanced Graphics Port
Microchannel Architecture
*Peripheral Component Interconnect-Express
Extended Industry Standard Architecture
26 A customer orders a new computer and specifies an internal read-write, non-volatile storage device that uses low power, has fast access to data, and is reliable. What is a suitable storage device that meets these requirements?
DVD+/-RW
*solid state drive
SATA hard drive
USB flash drive
27 Why are solid state drives reliable and therefore suitable to be installed in computers used in harsh industrial workplaces?
*They consume less power and have no moving parts.
The drive motors have larger storage capacity and can be mirrored.
Data is accessed from the drive disks faster than it is on other drives.
The encrypted data on solid state drives is more secure than it is with other drive technologies.
28 A company employee has very important data on a computer. What RAID level should be used if the criteria include that data be written and read simultaneously and that all data be duplicated using a minimum of three drives?
0
1
*5
0/1
thank u! u r the greatest! got 82% just memorized youre answers !
BalasHapusthnxx!!
BalasHapus